Weight | N/A |
---|---|
Dimensions | N/A |
Size | ⅛" BSP, ⅛" NPT, ⅜" BSP, ⅝" UNF Long, ⅝" UNF Short, Blank, M12 x 1.5, M14 x 1.5 |
Temperature Sensor Adaptor for RetroSport filter head or thermostat housing
£15.00(incl. VAT)
These adaptors are for use in our billet filter heads and thermostat housings and needs to be purchased separately.
Please note: We are only supplying these adaptors for use with sensors with dimensions shown in the drawings. Other sensors may well be OK, but you should ensure that they don’t extend too far through the adaptor as this may partially block flow.
Some typical uses are as follows:
5/8″ UNF short – Common Smiths style electrical sensor
5/8″ UNF long – Common Smiths style mechanical bulb
3/8″ BSP – Typically RaceTech mechanical bulb
You will need to use a little sealant or PTFE tape when installing this adaptor.
Weight: 12g
Weight includes all fixings as shown (no tools or packaging.)